Home    Handheld Instruments    Fiber Microscope    Fiber Inspection Probe
微信图片_20250218154015

Fiber Inspection Probe

Introduction

Inspection Probe

The Inspection Probe is a portable,video microscope used to inspect fiber

optic terminations.More specifically,it is used to inspect hard-to-reach connectors that 

are installed on the back side' of patch panels or inside hardware devices.It eliminates the

need to access the backside of patch panels or disassemble hardware devices prior to inspection.

 

Available Applications

Patch Panel Inspection

Many patch panels are designed to allow the front connector to be easily inspected,but the back one is often difficult to access.Inspecting the connector on the front side of the panel can usually be performed with a simple fiber inspection microscope.However,the back connectors are not as easily inspected with traditional microscopes,thus requiring time-consuming troubleshooting.The inspection probe offers a fast and effective means of installing,troubleshooting or maintaining fiber optic patch panels.

·Inspection of Cable Assemblies

When Video Inspection Probe is equipped with proper Adapter Tip,you can also inspect patch cords,pigtails,and cable assemblies.

 

Magnification

200x or 400x

Resolution Ratio

1um

Display

3.5"TFT-LCD,960x240 pixels

Video Output 

NTSC/PAL

Weight/Dimensions

0.18 kg/18×4×3.5cm

Wire Length

1.2M

 

Application

Adapter Type

25-U-M(2.5mm UPC Male):FC/SC/ST/E2000 patch cord UPC termination

125-U-M(1.25mm UPC Male):LC/MU patch cord UPC termination

25-A-M(2.5mm APC Male) : FC/SC/ST/E2000 patch cord APC termination

125-A-M(1.25mm APC Male) : LC/MU patch cord APC termination

25-U-F(2.5mm UPC)Female): FC/SC UPC bulkhead

LC-U-F(LCUPC Female): LCUPC bulkhead

20-U-M(SMPTE UPC Male):SMPTE UPC termination